Wednesday, October 21, 2020

Setting up a virtual studio using OBS Studio and Voice Meeter Banana

I had to come up with a way to setup some virtual studio style conferencing for a virtual event.  I have experience with OBS Studio but was required to have a sound track running before the stream.  Now having learned a bit about broadcast video I wasn't sure how I was going to setup the sound track as OBS doesn't really have a way of playing an audio file to another interface your not listening to.  

So to accomplish this I initially used a griffin iMic and set the input to line in.  Unfortunately because of the time constraints I must have had a bad cable or connection input setup that hooked up to a phone's headphone jack but the sound on it wasn't very good and could be better.  Instead of troubleshooting the cable, software inputs etc, I knew there were some virtual audio input software that could route songs, and input from other software like skype.  

Eventually I came across Voice Meeter Banana an advanced virtual mixing console able to manage 5 audio inputs (3 physicals and 2 virtual) and 5 audio outputs (3 physicals and 2 virtual) through 5 multichannel busses (A1, A2, A3 & B1, B2). Eventually I will probably get the virtual audio channeling setup properly to have an application or browser setup on it's own input but for right now I just need quick, dirty and it has to work.

I did a youtube video about some OBS Basics which can be viewed on my youtube channel.  

You will need to have OBS Studio installed and Voicemeeter Banana

The setup for piping the audio is simple.  The audio cassette in the picture below can play audio files in this case I have an mp3.  B1 is the Voicemeeter VAIO digital input which is also B1 which is lite up next to the audio cassette.  



The Hardware out A2 is set as the Voice Meeter Input which we will set as Mic/Aux 3 in OBS Studio as shown below.  This allows us to play the audio we require with an option of listening to it or not though our headphones on the computer speakers (which is set to Yeti Stereo Microphone).



To hear what your playing on on Mic/Aux3 you need to have audio monitoring set to monitor and output.  This will put play the audio on your primary computer speakers which is the Yeti Mic as we had stated before.  However if you continue to play the audio you can set audio monitoring for Mic/Aux3 to Monitor off.  



Your audio will continue to play and it will stream out unless you mute the audio on the output in OBS Studio which is shown by the speaker being either white or red.  The Red Speaker means your audio is muted while the white means that it is being passed through to the stream.  So in the image below Mic/Aux3 and Mic/Aux are live and will be heard in the stream while Desktop Audio, Desktop Audio 2 and Mic/Aux2 are muted and will not be heard.


To do the studio style interview setup I am using Google Meet but anything will work, skype, gotomeeting, zoom, and using window or display capture and the crop filter I crop the window where they are speaking so they fit in the 1920x1080 canvas.


The Google Meet call looks like this with 3 tiles and the layout is set to 6 tiles manually as at most you will have 3 users on screen.


The shots shown in green are the filter when there are 2 people on screen the red shows the crop filter set to when there are 3 people on screen.  Below I've distorted the images but you can see where the users are in the silhouette.  When they login to the google meeting you get them positioned and ask them not to move to much.  In the case of the framing I chose to setup I asked them to try stay in the middle of their camera and used OBS to scale to fit the rest of the frame.


the 2 person shot


3 person shot

After some thought, I thought I would try a new layout for OBS where I would layout the guest in a 16:9 format, because the guess were having a hard time staying in frame, so in OBS studio I used the display capture and the crop filter to setup video feeds from your meeting app of choice (in this case it happens to be google meet, but can be skype, zoom, teams, etc)


the blue outline is the crop from OBS Studio and with a live camera feed you get a result with a graphical background as shown below.  The top image is from an onsite camera with lighting and the other 2 are the cropped display from google meet.


Then you can have on display a computer screen video, etc, in this case it is an interview from google meet, where we just have the interviewer and the guest.  This gives more room for the interviewer to move and keeps them from getting cut off because of such type framing going with the full screen view as shown above.

Depending on the setup you can also have different frame this below is done with a camcorder and a HDMI to USB capture card, with 2 point lighting.  OBS will let you make groups and put graphics and text as shown below.

I put a graphic on the left and put a tight shot which was scaled from the wide shot from the shot above.

Audio quality is really important and depends if they have a microphone; most of the time they are using the phone or built in mic on the laptop and adjustments must be made with speakers so you don't get feedback from hearing your self through their speakers and back through their mic.  To prep it up takes about 30 minutes, for placement and audio.  For people doing this I would recommend they ask people wear earphones and get an irig mic or something similar.  It makes a big difference in the sound.

It is difficult to keep people from moving but this setup does work pretty well, to see some samples checkout the STARFest - St. Albert Readers Festival videos.

Tuesday, September 15, 2020

FreeNAS What is a L2ARC Cache and why is it useful?

In FreeNAS nothing beats RAM. A general rule of thumb is a minimum is 1GB of Ram per TB of storage but might need to be adjusted depending on workload/application.  Personally I prefer to have 2 GB RAM to 1 TB of disk if possible. Generally in the FreeNAS (truenas) community it is well known that it is recommended that FreeNAS run on 32GB of ECC RAM minimum, however I have found that if you are using a the 2:1 Ram ratio you can use non-ecc ram and FreeNAS runs fine though is not recommend by FreeNAS; but you work with what you got.

FreeNAS uses ZFS which provides a read cache in RAM, known as the ARC, to reduce read latency. FreeNAS adds ARC stats to top(1) and includes the arc_summary.py and arcstat.py tools for monitoring the efficiency of the ARC. 

If you use a L2ARC cache it is recommended using an SSD as a cache device.  ZFS uses it to store more reads which can increase random read performance.  If you are using a low ram system you shouldn't use a L2ARC, it will not increase performance, and in most cases you will actually hurt performance and could cause system instability.  If the hit rate of the ARC is below 90%, the system can benefit from L2ARC. If the ARC is smaller than RAM or if the hit rate is 99.X%, adding L2ARC to the system will not improve performance, the L2ARC is really only useful if your asking for the same data over and over again. 

As far as selecting appropriate devices for L2ARC, they should be biased towards random read performance. The data on the L2ARC is not persistent, and the L2ARC will be cleared on a reboot.  If you have a drive failure on your L2ARC device there is no need to worry ZFS is resistant and only uses it for read caching; your NAS will continue to function, however read performance will most likely be affected.  There is no need to provision, mirror or otherwise make L2ARC devices redundant, nor is there a need for power protection on these devices.

For example on some of my backup NAS systems I've build where I am moving over 500+ GB of data within 20 minutes my L2ARC cache gets hit quite a bit.  However it depends on what your doing.  It might be more beneficial to have a mirrored SSD pool for more active data and spinning drives for less active content then having a L2ARC Cache if the data needs to be read.

I would suggest using the tools in FreeNAS and monitoring your L2ARC's effectiveness using tools such as arcstat. If you need to increase the size of an existing L2ARC, you can stripe another cache device using Volume Manager. The GUI will always stripe L2ARC, not mirror it. As stated above the L2ARC data is not persistent.

I usually add a L2ARC if I have a spare SSD handy; with a 2:1 RAM ratio my experience is that it does help more then hurt but it depends on what your setup is and what your using it for.  Most of the NAS Systems I use are used for smb backups, and I'm backing up severs virtual disks which are always changing and moving them from NAS to NAS.  Having an L2ARC cache doesn't help there but with a file server that servers out files that don't change much the L2ARC does help with the read performance.

Note: that a dedicated L2ARC device can not be shared between ZFS pools.

Setting up Microsoft for Non-Profits

Google has been given access to GSUITE for a while now and I've setup several non-profits with this and do occasionally help them administrate it if required.  Now Microsoft is getting in the game (and this is a good thing) now giving Office 365 for free for non-profits.

Microsoft 365 is now free for non-profits
This post will go though what is required to apply and (hopefully) get approved for Microsoft 365 for Non-Profits.  I highly recommend before going forward you go thought the https://www.microsoft.com/en-us/nonprofits/ site and verify your eligibility.  The plans that are available for free are the Office 365 Nonprofit Business Essentials and 

Before you setup your Microsoft 365 account I recommend you have the following:
  • a techsoup account
  • a domain, ie. $yourdomain.ca
  • an email on that domain that can receive email.  This may require setting up an email alias if you don't have your own server
  • a way to verify your registration.  I recommend using a business or corporation number
  • picture of registration information
When you have all this information setup then you can go ahead and signup for Microsoft 365 Business for Non Profits.  When signing up I used a image of the registration information.  In the case of the setup I did I used the corporation number, and your techsoup validation token.

For more information about what is included in the free version of office 365 for non-profits.  https://www.techsoup.org/support/articles-and-how-tos/what-you-need-to-know-about-microsoft-office-365-nonprofit




Once you've filled out all the information you will get a verification email stating that the office 365 application is in progress.

Office 365 Verification
Once your organization has been verified you will get an email informing you to some of the services that are available for your organization.


When you go to login you can use the non-profit portal to login.  Typically you will be logging in with the format $user@$domain.onmicrosoft.com

Once you login to the non-profit portal you see your status and quick links for github, linkedin, and more Microsoft services that are available to you.


When you sign in to office.com you will be taken to a dashboard.


From here you can go into the office admin, non-profit portal, etc.  At least for this non-profit I am showing you the dashboard for they are allowed up to 25 unique users.



My experience with google there is no limit on the number of users you can have, but if you want Microsoft's products and services this is a fantastic service which I am sure will cut into google apps for non-profits adopters.  I found the setup and verification quick and fairly easy.  You are required to setup 2FA for the administrator account and for that I use and recommend Microsoft Authenticator available on Google Play and iOS


Friday, September 11, 2020

Installing a small footprint version of Ubuntu Desktop for Ubuntu Server

When I install a Linux server like Ubuntu Server, I occasionally do require a desktop but I don't want all the additional software that comes with the gui like LibreOffice, Thunderbird, etc.  Don't get me wrong, this is all great software for a client desktop but it isn't something that one might want on a server.  To achieve a small desktop footprint I do the following:

  • Get and install updates
    "sudo apt-get install update"
  • Get and install upgrades
    "sudo apt-get install upgrades"
  • Install lightdm
    "sudo apt-get install lightdm"
  • Install Unity
    "sudo apt-get install unity"
  • Install ubuntu desktop

    *** Important update ****
    When I went to setup a new lite version of ubuntu server when I tried to use the latest version of Ubuntu Server 20.04.02 and ran 

    "sudo apt-get install --no-install-recommends ubuntu-desktop"

    I got the following error

    "Command line option --no-install-recommends is not understood in combination with other options"

    In previous versions of Ubuntu the command works fine such as in 16.04.07 but in Ubuntu 20.04.02 I had to use

    "sudo apt-get install ubuntu-desktop-minimal"

    So please note this important change if you are trying to create a minimal version of a linux desktop; this may also affect other distros.

    Then continue with the other installs


    "sudo apt-get install compizconfig-settings-manager"
    "sudo apt-get install firefox"
    "sudo apt-get install net-tools"

If you want to pin the terminal application to the launcher, but the launcher won't show up in your applications though the gui.

No Terminal Application showing up

To add the terminal to the launcher is to right click on the desktop and open the terminal




Once the terminal is open right click on the terminal in the launcher and lock to launcher





Friday, September 04, 2020

Setting up Papercut print release system for Linux

Ramsey Public Library Envisionware Print Release System
In December of 2019 an organization was expanding and opening a new location.  This post is part 1 of a 4 part series which will go though the investigationThey offer public printing services and were using a public printing solution from Envisionware called LPTONE.  I did a previous post on this software in 2018 with setting up a release station with the Envisionware LTPONE software.    

However after investigating upgrade options and the cost for adding an additional location and coinop for the release station it was not a cost effective solution since new hardware would be required for both locations and there was just not the budget for it.  Not to mention the difficulty of managing two release systems that were non-centralized.


Ramsey Public Library uses an envisionware print release system, I know from the experience I've had with it; it's ok but it is quite lacking and expanding they system it is currently on to windows server from windows 10 pro would be quite the expense as it would require more then 2 machines with server if we ever got over 30 clients and we were right on the cusp of being.  



ITC 5400 COINOP
The organization had service contracts with Toshiba for managing the maintenance and materials of their printers which also included a ITC 5400 coinop, which was attached to one of the copiers for paid copies; so I investigated if that company had any kind of print management software that could use the same coinop and if the coinop could do double duty for the coping and the printing.  After contacting ITC and verifying that yes indeed the 5400 coinop can do double duty for the printing and coping payment; however they use a 3rd party software for the print management called papercut.

Now Papercut is a centralized print management solution, that works on Linux or Windows and is actually pretty light on system requirements.  At a glance you would think for just managing client side printing the NG version would all that is required however it didn't quite do all that was desired from the printing side so it was decided to go with the MF version.  The project started with a decision to go with a Ubuntu 18 LTS virtual server on Hyper-V to host the papercut MF software.


You can view Papercut's System Requirements I found on Hyper-V these settings work pretty good for a workgroup of of about 40 clients.


Processor: 2 Core


Minimum 4GB of Ram (max of 16GB) Dynamically Assigned



Disk Space: 
3GB for Log, 100GB free disk space, between 60 and 500GB recommended.



Here are the CDN links for the papercut software if you want to try it yourself.


Linux:

https://cdn1.papercut.com/web/products/ng-mf/installers/mf/19.x/pcmf-setup-19.1.5.52403.sh

Setting up Papercut on Ubuntu Server 18.03 LTS / 20.04 LTS


There are a couple things you need to know before you can install papercut on Linux.

  1. The "ROOT"/Administrator must be called papercut
  2. The user must have sudo access for the install
So when you install your username must be papercut, otherwise you will have serious issues with your install, with permissions etc.  

For this install I'm going to use the following credentials:

  • username: papercut
  • password: papercut
and I am installing open ssh and powershell.

Once we have finished our base install we will need to install the following (for a slimmed  down version):
  • Get and install updates
    "sudo apt-get install update"
  • Get and install upgrades
    "sudo apt-get install upgrades"
  • Install lightdm
    "sudo apt-get install lightdm"
  • Install Unity
    "sudo apt-get install unity"
  • Install ubuntu desktop
    "sudo apt-get install --no-install-recommends ubuntu-desktop"
    "sudo apt-get install compizconfig-settings-manager"
    "sudo apt-get install firefox"
    "sudo apt-get install net-tools"
If you don't want a slimmed down version just use "sudo apt-get install ubuntu-desktop"
  • restart
  • Install and configure cups
    "sudo apt-get install cups (should be already installed)"
  • add the papercut user to the printer admin for cups
    sudo usermod -a -G lpadmin "$USERNAME"
  • Install Samba
    "sudo apt-get install samba"
  • add the papercut user to the sudoers list
    sudo vi /etc/sudoers
    papercut ALL=(ALL:ALL) ALL
  • Install papercut
    chmod 777 "PATH TO PAPERCUT".sh
    sudo ./"PAPERCUT INSTALLER"
You can watch a video on the full process on my youtube channel here. https://youtu.be/9re8L6uWc94



Friday, August 28, 2020

Creating a MacOS administrator account when none exists

An easy and safe way create an administrator account when non-exists on MacOS is to boot into single user mode and mount the OS drive. We actually want to delete a file called the .AppleSetupDone file located in /var/db. This will cause the user wizard to run again where you can create any kind of account again after you exit or reboot out of single user mode including an administrator account.

Here are the steps:

  1. Turn on your mac pressing the "command ⌘" key + S. This will boot you into Single User Mode
  2. Mount the drive by typing /sbin/mount -uw /
  3. type rm /var/db/.AppleSetupDone
  4. type exit or reboot and it will run the account setup wizard and setup the administrator account

Friday, August 21, 2020

Veeam licence error when trying to replicate or backup

My organization uses Veeam as our main backup utility.  It really is a great piece of software but it does have some quirky things about it as everything does.  I do think though this is a bit of an outlier to be fair.  I have 2 production servers that need to be release and support was no longer available for it.  We were hoping that they would last until early next year but the main production server just had one of it's drives in a RAID 10 die so we decided to fail everything over to the backup server and make that the production server.  

Production Server RAID 10 Drive Failure
Production Server RAID 10 Drive Failure

After permanently failing over the virtual servers, I was trying to setup a new replication job to make the production server the backup.  I reverse my source and destination for my backup jobs, and tried to run my backups and replication and was getting an error.


VM $myVM task has finished with 'Failed' state.

Task details: Failed to process replication task Error: Unable to process workload: license has been exceeded

Even though I have 2 servers the Veeam licence is clearly a one way street, and backing up from the first server to the second server is fine, backing up from the second server to the first one is not.  If I had 4 core licencing instead of 2 this probably would have worked since these are both 2 socket servers.  Regardless of this minor issue, I still want to setup a failover to the server with the bad drive, because stuff happens.

So to reset the license to enable backup and replication, 

Go Menu -> License

Select the "Sockets" tab

Select the server -> Then Revoke.

Once you do this and you update your backup and replication the license will be applied to the other server and your backups and replications will begin working again.

Friday, August 07, 2020

Performing an upgrade for Horizon Web Services

Upgrading Horizon Web Services is unfortunately more/less a full reinstall of the Apache tomcat server and software which you can read my post about here.  This means you will have to re-apply any TLS certificate you have setup with your Horizon Web Services (which is a pain but do able).

On my previous post we installed Horizon Web Services 201709 (you can see the full version number in the picture) and now we are going to upgrade to version 6.0.2R2 from 201709

Now this is a few versions behind and since an upgrade to Horizon 7.5.5 from 7.5.4.1 an app produced by sirsidynix called mobilecirc (mobile staff) available for both android and ios broke and will not allow you to create/register new users.

Before you begin your upgrade you will want to backup your classes directory in the webapps  directory webapps\"YourHorizonWebServicesInstanceName"\WEB-INF\classes

It is safest to stop your service before doing the backup.  In this case "Apache Tomcat HWS"
The web-inf\classes directory is in the web directory you setup when you installed tomcat typically "hzws" if you use the defaults.  I just backed up the whole web directory as a zip file.
Then you should uninstall the version of Web services your using thought the program and features in the control panel.  Since 201709 is running on tomcat 7, and version 6.0.2R2 is on tomcat 8, this will also upgrade our tomcat install.
Once uninstalled reboot the server, and start the installation of Web Services you want to install in this case we are doing 6.0.2R2.
Now for the java vm I am selecting the latest version of java for this.

Then the rest of the install works just like in my post to install Horizon Web Services.  Once the install is done don't forget to go to Services and change the startup type to automatic.


Once the service is started, you will have to fix the TLS certificate.  The installer resets all customized tomcat configurations.


You will have to edit the server.xml file located in Webservices\conf\server.xml and update your keystorefile,  keystorepass, and server values 


Restart Apache tomcat and the TLS Certificate should be working properly.
and our web services is now version 6.0.2.201291521






Friday, July 24, 2020

SMTP error codes, meanings and what to do

A while back I made this email error code list because of a number of bounce backs a company was having with their mail list.  Unfortunately they hadn't been keeping the list up to date an were having 510/511 and 554 errors as they were using a mail client to send the emails and had sent them a little to often.  So to save them and myself time I create this list of errors, so they could see what the bounce back error was and look it up.  If you want a printable version I have a google doc version as well as a PDF version.  If your looking for great email diagnostic tool MX TOOLBOX is a great resource.

CODEMEANINGHOW TO SOLVE IT / WHAT TO DO
101The server is unable to connect.Try to change the server's name (maybe it was spelt incorrectly) or the connection port.
111Connection refused or inability to open an SMTP stream.This error normally refers to a connection issue with the remote SMTP server, depending on firewalls or misspelled domains. Double-check all the configurations and in case ask your provider.
211System status message or help reply.It comes with more information about the server.
214A response to the HELP command.It contains information about your particular server, normally pointing to a FAQ page.
220The server is ready.It's just a welcome message. Just read it and be happy that everything is working (so far)!
221The server is closing its transmission channel.It can come with side messages like "Goodbye" or "Closing connection". The mailing session is going to end, which simply means that all messages have been processed.
250Its typical side message is "Requested mail action okay completed": meaning that the server has transmitted a message.The opposite of an error: everything has worked and your email has been delivered.
251"User not local will forward": the recipient's account is not on the present server, so it will be relayed to another.It's a normal transfer action. For other information check out our article on what is an SMTP server.
252The server cannot verify the user, but it will try to deliver the message anyway.The recipient's email account is valid, but not verifiable. Normally the server relays the message to another one that will be able to check it.
354The side message can be very cryptic ("Start mail input end <CRLF>.<CRLF>"). It's the typical response to the DATA command.The server has received the "From" and "To" details of the email, and is ready to get the body message.
420"Timeout connection problem": there have been issues during the message transfer.This error message is produced only by GroupWise servers. Either your email has been blocked by the recipient's firewall, or there's a hardware problem. Check with your provider.
421The service is unavailable due to a connection problem: it may refer to an exceeded limit of simultaneous connections, or a more general temporary problem.The server (yours or the recipient's) is not available at the moment, so the dispatch will be tried again later.
422The recipient's mailbox has exceeded its storage limit.Best is to contact contact the user via another channel to alert him and ask to create some free room in his mailbox.
431Not enough space on the disk, or an "out of memory" condition due to a file overload.This error may depend on too many messages sent to a particular domain. You should try again sending smaller sets of emails instead of one big mail-out.
432Typical side-message: "The recipient's Exchange Server incoming mail queue has been stopped".It's a Microsoft Exchange Server's SMTP error code. You should contact it to get more information: generally it's due to a connection problem.
441The recipient's server is not responding.There's an issue with the user's incoming server: yours will try again to contact it.
442The connection was dropped during the transmission.A typical network connection problem, probably due to your router: check it immediately.
446The maximum hop count was exceeded for the message: an internal loop has occurred.Ask your SMTP provider to verify what has happened.
447Your outgoing message timed out because of issues concerning the incoming server.This happens generally when you exceeded your server's limit of number of recipients for a message. Try to send it again segmenting the list in different parts.
449A routing error.Like error 432, it's related only to Microsoft Exchange. Use WinRoute.
450"Requested action not taken – The user's mailbox is unavailable". The mailbox has been corrupted or placed on an offline server, or your email hasn't been accepted for IP problems or blacklisting.The server will retry to mail the message again, after some time. Anyway, verify that is working on a reliable IP address.
451"Requested action aborted – Local error in processing". Your ISP's server or the server that got a first relay from yours has encountered a connection problem.It's normally a transient error due to a message overload, but it can refer also to a rejection due to a remote anti spam filter. If it keeps repeating, ask your SMTP provider to check the situation. (If you're sending a large bulk email with a free one that can be a common issue).
452Too many emails sent or too many recipients: more in general, a server storage limit exceeded.Again, the typical cause is a message overload. Usually the next try will succeed: in case of problems on your server it will come with a side-message like "Out of memory".
471An error of your mail server, often due to an issue of the local anti-spam filter.Contact your SMTP service provider to fix the situation.
500A syntax error: the server couldn't recognize the command.It may be caused by a bad interaction of the server with your firewall or antivirus. Read carefully their instructions to solve it.
501Another syntax error, not in the command but in its parameters or arguments.In the majority of the times it's due to an invalid email address, but it can also be associated with connection problems (and again, an issue concerning your antivirus settings).
502The command is not implemented.The command has not been activated yet on your own server. Contact your provider to know more about it.
503The server has encountered a bad sequence of commands, or it requires an authentication.In case of "bad sequence", the server has pulled off its commands in a wrong order, usually because of a broken connection. If an authentication is needed, you should enter your username and password.
504A command parameter is not implemented.Like error 501, is a syntax problem; you should ask your provider.
510/511Bad email address.One of the addresses in your TO, CC or BBC line doesn't exist. Check again your recipients' accounts and correct any possible misspelling.
512A DNS error: the host server for the recipient's domain name cannot be found.Check again all your recipients' addresses: there will likely be an error in a domain name (likemail@domain.coom instead of mail@domain.com).
513"Address type is incorrect": another problem concerning address misspelling. In few cases, however, it's related to an authentication issue.Double check your recipients' addresses and correct any mistake. If everything's ok and the error persists, then it's caused by a configuration issue (simply, the server needs an authentication).
523The total size of your mailing exceeds the recipient server's limits.Re-send your message splitting the list in smaller subsets.
530Normally, an authentication problem. But sometimes it's about the recipient's server blacklisting yours, or an invalid email address.Configure your settings providing a username+password authentication. If the error persists, check all your recipients' addresses and if you've been blacklisted.
541The recipient address rejected your message: normally, it's an error caused by an anti-spam filter.Your message has been detected and labeled as spam. You must ask the recipient to whitelist you.
550It usually defines a non-existent email address on the remote side.Though it can be returned also by the recipient's firewall (or when the incoming server is down), the great majority of errors 550 simply tell that the recipient email address doesn't exist. You should contact the recipient otherwise and get the right address.
551"User not local or invalid address – Relay denied". Meaning, if both your address and the recipient's are not locally hosted by the server, a relay can be interrupted.It's a (not very clever) strategy to prevent spamming. You should contact your ISP and ask them to allow you as a certified sender. Of course, with a professional SMTP provider like turboSMTP you won't ever deal with this issue.
552"Requested mail actions aborted – Exceeded storage allocation": simply put, the recipient's mailbox has exceeded its limits.Try to send a lighter message: that usually happens when you dispatch emails with big attachments, so check them first.
553"Requested action not taken – Mailbox name invalid". That is, there's an incorrect email address into the recipients line.Check all the addresses in the TO, CC and BCC field. There should be an error or a misspelling somewhere.
554This means that the transaction has failed. It's a permanent error and the server will not try to send the message again.The incoming server thinks that your email is spam, or your IP has been blacklisted. Check carefully if you ended up in some spam lists, or rely on a professional SMTP service like turboSMTP that will nullify this problem.

Updating your godaddy certs during the G2 intermediate hierarchy to the TLS Root CA - R1 hierarchy

  If you use GoDaddy TLS certificates you should be aware of some changes during the transition from the G2 Intermediate certificates to the...